 | Hi-Die Cutting Machine
Reference ID: 7068
Size of Cutting Area 25-1/2"x54-3/8"x9" Throat Opening. Like New Condition & Semi Automatic |
 | 1998 Shung Fa Die Cutter
Reference ID: 5079
40” Die Cutter w/Stripping; Includes: (2) Chases, (2) Plates, Complete Upper and Lower Stripping Sections w/Tools; All Manuals Included, Currently Un... |
 | 1998 Blumer Model MCB 4.1
Reference ID: 7088
Hi-Die Die-Cutting Machine;
Includes Control Cabinet and Cutter; Automatic Feed, Push Plate, Turning Device |
 | 1984 Bobst SP 130-ER
Reference ID: 8300
Continuous Feed and Delivery; Double Sheet Detector; 2 Chases; 2 Stripping Frames; 2 Blanking Frames; 1 Universal Blanking Frame; Rated s.p.h. 7000; ... |
 | 1997 Yawa TYMB 1040
Reference ID: 7146
40" Clam Shell Die Cutter |
 | MC3 Magnacutter
Reference ID: 8194
Precision Quality Kiss Cutting and Die Cutting; High Production Speeds Up to 5000 Sheets per Hour; Enables Continuous Cutting Profiles to be Achieved... |
 | Heidelberg Windmill
Reference ID: 8207
For Die Cutting, Numbering, etc. |
 | 1963 Bobst SP 1080 E
Reference ID: 8224
Single Action Stripping; 2 Chases; 2 Plates |
 | 1997 Kyoeki TX-950 Blanking Machine
Reference ID: 8303
Off-Line Stand-Alone Blanking Machine, Pin-Board System, Automatic Die Setting, Paper Feeder and Strap Conveyor, Paper Dust Collector, Safety Devices |
 | 2001 Sanwa TRP-1060SE
Reference ID: 8311
Continuous Feed & Delivery; Stripping; 3 Chases; 4 Plates |
 | 1999 Bobst SP 104 E
Reference ID: 8323
Rake Delivery; 2 Chases; 2 Plates; 1 Set of Stripping Frames; Cube System; Electronic Double Sheet Detector; Piab Air System; Continuous Feed (Swords... |
 | Die Shop Tooling
Reference ID: 6106
(1) Short Bender; (1) Miter; (1) Cut-Off; (1) 1/8" Notcher; (1) 1/4" Notcher; (1) Sandvik Pneumatic Rule Puller; (10) Sets of Dies |
 | Heidelberg SBG Cylinder Die Cutter
Reference ID: 9355
22" x 30 1/4" (56 x 77 cm) |
 | 1976 Bobst SP 1260 E BM
Reference ID: 9403
4 Chases; 3 Plates; Heated Upper Platen; Foil Unit |
 | 1985 Bobst SP 130 ER
Reference ID: 9404
2 Chases; Stripping & Blanking Sections; 2 Sets of Upper & Lower Stripping Chases; 2 Sets of Upper & Lower Stripping Frames |
 | 1994 Standard DC 1020
Reference ID: 9407
- |
 | Heidelberg Windmill
Reference ID: 9409
- |
 | 1999 Iijima MJ-1030E
Reference ID: 9413
2 Chases; 2 Plates; Mabeg Feeder |
 | 1986 Cauhe Handfed Die Cutter
Reference ID: 9418
Max. Sheet Size: 1,240mm x 2,050mm (48.82” x 80.71”) |
 | 1980 Bobst SP 126 E with Eagle Foil System
Reference ID: 9423
2 Chases; 2 Plates; 2 Honeycombs; 2 Side Guides; Continuous Feed and Delivery |
 | 1984 Iijima BF-1000S
Reference ID: 9430
Mabeg Feeder; 2 Chases; 2 Plates |
 | Johannisberg 104 S
Reference ID: 9454
29" x 41" Die Cutter |
 | 1990 Iijima JFB-1030
Reference ID: 9458
5 Chases; 5 Plates; 3 Sets of Stripping Frames; 3 Sets of Blanking Frames |
 | 1962 Bobst SP 1080 E
Reference ID: 9460
3 Chases; 1 Side Guide; Single Action Stripping; 1 Stripping Frame |
 | Standard Clam Shell Die Cutter
Reference ID: 9468
Model 25X37 |
 | 1999 Brausse SBL 1050-SE
Reference ID: 9471
2 Chases; 2 Plates; Pre-Loader; Continuous Feed and Delivery; 1 Set of Upper and Lower Stripping Frames; Complete Set of Upper and Lower Stripping Pi... |
 | 2000 Yawa MW 1050 A II
Reference ID: 9472
2 Chases; 2 Plates; 2 Side Guides; Continuous Feed and Delivery; Under Power and In Production |
 | 1998 Bobst SP 102 E-II
Reference ID: 9496
2 Chases; 1 Plate; 2 Side Guides; Continuous Feed and Delivery; Double Sheet Detection; Cube System |
 | 1987 Bobst SP 102 CER
Reference ID: 10599
2 Chases; 2 Plates; Pre Make Ready Table; Left and Right Side Guides; 2 Upper Stripping Frames; 2 Lower Stripping Frames; 2 Top Blanking Frames; 2 Bo... |
 | 1989 Bobst SP 102 CER
Reference ID: 10600
5 Chases; 5 Plates; Photo Eye Registration; Stripping and Blanking |
 | Hand Die Tools
Reference ID: 9501
3 Helmold Steel Cutting & Creasing Rules; 1 Notting Notching Tool |
 | Heidelberg SBD Cylinder Die Cutter
Reference ID: 9504
25" x 35" |
 | Heidelberg SBB Cylinder Die Cutter
Reference ID: 9508
- |
 | Heidelberg SBG Cylinder Die Cutter
Reference ID: 9509
- |
 | 1994 Sugano NFS 1050
Reference ID: 10526
Mabeg Stream Feeder; Double-Action Stripping; Continuous Feed and Delivery; Pre-Loader |
 | Heidelberg KSBA Cylinder Die Cutter
Reference ID: 10549
18" x 23" |
 | 1994 Brausse SBL 1050-SE
Reference ID: 10553
Pre-Loader; Continuous Delivery; Stripping; 2 Chases; 1 Plate; 2 Push Side Guides |
 | 1989 Cauhe Handfed
Reference ID: 10555
Max. Sheet Size: 1,200mm x 1,800mm (47.23” x 70.85”) |
 | 1964 Bobst SP 1260 E
Reference ID: 10557
3 Chases; 5 Plates |
 | 1972 Bobst SP 900 E
Reference ID: 10558
2 Chases; 1 Plate; Refurbished in 1997 |
 | Heidelberg SGS Cylinder Die Cutter
Reference ID: 10566
Max. Sheet Size: 720mm x 1040mm (28 3/8" x 41"); Min. Sheet Size: 400mm x 500mm (15 3/4" x 19 11/16"); Max. Speed: 4,000 sph |
 | 1994 Sugano NFS-1050
Reference ID: 10568
Pre-Pile; Mabeg Feeder; 2 Chases; 2 Plates; 2 Side Guides; 2 Sets of Stripping Frames |
 | 1998 Sugano NFS-1050M
Reference ID: 10569
Pre-Pile; Mabeg Feeder; 2 Chases; 2 Plates; 2 Side Guides; 2 Sets of Stripping / Blanking Frames |
 | 1992 Sanwa TRP-1060-SE
Reference ID: 10574
- |
 | 2004 Sanwa TRP-1060 SS
Reference ID: 10575
- |
 | 1989 Bobst SP 102 E
Reference ID: 10577
2 Chases; 2 Stripping Chases; 15 Sets of Stripping Pins (Upper & Lower); 10 Sets of Stripping Bars (Long & Short) |
 | 1971 Bobst SP 1260 BM
Reference ID: 10582
- |
 | 1996 Sanwa TRP 1060 SE
Reference ID: 10585
3 Chases, 3 Plates, Stripping Equipment, Tape Inserter, Platform |
 | 2001 Sanwa TRP 820 SE
Reference ID: 10586
6 Chases, 6 Plates, Stripping |
 | 1984 Iijima BF 1270
Reference ID: 10587
Stripping, Autofeeds, Extra Plate & Chases |
 | Johannisberg 104 S
Reference ID: 10591
29" x 41" Die Cutter |
 | 1994 Bobst SP 102 SE with Eagle Foil System
Reference ID: 10602
1 Chase; 1 Honeycomb Chase; Stripping Bars; 1 Set of Upper and Lower Stripping Chases; 1 Set of Upper and Lower Pins with Sponges; 12 Zone Eagle Foil... |
